 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-209-34-2-3
FRAME 14
1.
Check that shafts (1 and 2) have 0.005 inch end play. If needed, take off bearing
caps (3 and 4) and add or take off shims (5 and 6) until end play is 0.005 inch.
2.
Put cotter pin (7) through nut (8) and shaft (1).
3.
Put cotter pin (9) through nut (10) and shaft (2).
GO TO FRAME 15
18-263
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version