 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-209-34-2-3
FRAME 2
Put bearing (1) on shaft (2) with bearing against gear (3).
1.
Put bearing cap (4) on housing (5). Put in four capscrews and washers (6).
2.
NOTE
Lip of seal (7) must face in toward housing (5) and casing
must be flush with outside of bearing cap (8).
If oil seal (7) was taken out, put in new seal.
3.
4.
Put bearing cap (8) with seal (7) and shims (9) as noted on housing (5). Put in four
capscrews and washers (10).
GO TO FRAME 3
18-251
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version