FEED AND DRIVE CLUTCH AND BRAKE ASSEMBLIES AND CLUTCH SHAFT PINIONS REMOVAL, REPAIR, AND REPLACEMENT (TRUCK M764) - continued

TM 9-2320-209-34-2-2

Cleaning. There are no special cleaning procedures needed. Refer to

cleaning procedures given in Part 1, para 1-3.

NOTE

Clean all parts before inspection and after repair.

d. Inspection and Repair.

FRAME 1

Check that clutch case cap ball bearing (1) and two drive sleeve ball

bearings (2) are not worn or scored. If bearings are damaged, get new ones

in their place.

2. Check that pressure plate release bearing (3) is not worn or scored. If

bearing is damaged, take out bearing cup (4) and get a new bearing and

bearing cup.

GO TO FRAME 2