LIFTING SHACKLE REMOVAL, REPAIR, AND REPLACEMENT (TRUCKS M109A2, M109A3, M185A2, AND M185A3) - continued

TM 9-2320-209-34-2-2

(3) Cleaning, inspection, and repair.

WARNING

Dry cleaning solvent is flammable. Do not use

near an open flame. Keep a fire extinguisher

nearby when solvent is used. Use only in well-

ventilated places. Failure to do this may result

in injury to personnel and damage to equipment.

(a) Cleaning. Using dry cleaning solvent, clean all parts. Use a stiff

brush if needed. After cleaning, use cold water to rinse off any solvent.

(b) Inspection. Check that all parts have no cracks, breaks or

distortion.

TM 9-237. Hammer out any bends or dents. Refer to FM 43-2.

(4) Assembly.

Aline shackle (1) and shackle bracket (2). Put shackle pin (3) in place.

2. Put cotter pin (4) in shackle pin (3).

END OF TASK

17-422