Pushrod Bushing Assembly Repair.

TM 9-2320-209-34-2-1

f. Pushrod Bushing Assembly Repair.

FRAME 1

WARNING

Care must be taken not to damage seal area

or pushrod bushing. Failure to do this may

result in brake failure which may cause injury

to personnel and damage to equipment.

NOTE

Use a blunt instrument to aid in the removal and

installation of the seal.

1. Pry out seal (1) through center hole of washer at the end of pushrod bushing

(2) Throw away seal.

2. Check that bore of pushrod bushing (2) and seal area is not scored, scratched,

or damaged in any way. If bushing is damaged, get a new pushrod bushing assembly.

Lubricate pushrod bushing (2) with silicone brake fluid.

WARNING

Ensure seal is correctly installed in accordance with

Position shown in illustration. Failure to install

correctly could cause loss of life, personal injury

and/or destruction of property.

4. Lubricate seal (1) with silicone brake fluid, then install by compressing and

inserting through the washer center into pushrod bushing (2). Carefully work seal

into place.

Change 1