 |
|||
|
|
|||
|
Page Title:
FRONT AND REAR SERVICE BRAKE DRUM REPAIR. |
|
||
| ||||||||||
|
|
 TM 9-2320-209-34-2-1
TOOLS : Drum turn arbor fixture, pn 11660096
SUPPLIES : None
PERSONNEL: One
EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.
a. Preliminary Procedure. Remove brake drum assembly. Refer to
TM 9-2320-209-20.
b. Cleaning.
WARNING
Do not use a wire brush or compressed air to clean brake
drum (1). There may be asbestos dust on the drum
which can be dangerous to your health if you breathe it
in.
1.
Clean dirt or mud from brake drum (1) using a brush and water.
WARNING
Dry cleaning solvent is flammable. Do not use near an
open flame. Keep a fire extinguisher nearby when solvent
is used. Use only in well-ventilated places. Failure to do
this may result in injury to personnel and damage to
equipment.
2. To take off any oil or grease from brake drum (1), use dry cleaning solvent.
END OF TASK
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version