 |
|||
|
|
|||
|
Page Title:
REDUCTION DRIVE CHAINS ADJUSTMENT (TRUCK M764) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-209-20-3-4
FRAME 2
1.
Using 3/4-inch wrench, loosen locknut (1) on adjusting screw (2).
2.
Hold straight edge along top of chain (3) as shown. Hold 6-inch ruler at
midpoint of chain (3). Push down on top of chain and check that there is
1/2 inch of slack.
If there is less than 1/2 inch of slack, using 1/2-inch wrench, loosen adjust-
3.
ing screw (2). If there is more than 1/2 inch of slack, tighten adjusting
screw.
4.
When there is 1/2 inch of slack, using 1/2-inch wrench, hold adjusting screw
(2). Using 3/4-inch wrench, tighten locknut (1).
GO TO FRAME 3
19-96
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version