DISCHARGE VALVE OPERATING LEVER REMOVAL AND REPLACEMENT.

9-2320-209-20-3-3

18-32. DISCHARGE VALVE OPERATING LEVER REMOVAL AND REPLACEMENT.

NOTE

Truck M49A1C has three discharge valve operating

levers. Truck M49A2C has two discharge valve

operating levers. This task is the same for both

trucks, but details are shown for truck M49A1C.

TOOLS: 3/4-inch open end wrench

1/2-inch open end wrench

7/16-inch open end wrench (2)

Pliers

Leather gloves

SUPPLIES: None

PERSONNEL:

One

Truck parked, engine off, handbrake set.

EQUIPMENT

CONDITION:

WARNING

Smoking, sparks, or open flame are not allowed

within 50 feet of fuel truck during this task.

Fuel may burn, causing explosion, injury to

personnel, and damage to equipment.

Always wear protective gloves when handling

cable. Do not let cable slip through hands.

Rusty or broken wires can cause injury.

a. Removal.

FRAME 1

Open truck rear compartment doors.

Using 1/2-inch wrench, unscrew and take off four nuts (1). Take four

cables (2) out of four special bolts (3).

GO TO FRAME 2