REAR SPRING REMOVAL AND REPLACEMENT - continued

TM 9-2320-209-20-3-2

FRAME 2

WARNING

Spring is heavy. Make sure spring does not fall and

cause injury to personnel and damage to equipment.

Put spring (1) in place so spring seat (2) is in middle of spring and spring is

down on spring seat.

Put saddle (3) on spring (1).

Put U-bolts (4) over saddle and through spring

seat (2) in two places.

Put lockwashers (5) and nuts (6) on U-bolts (4) in two places. Using torque

wrench, tighten nuts to 190 to 230 pound-feet.

NOTE

Follow-on Maintenance Action Required:

Replace wheels. Refer to TM 9-2320-209-10.

Jack up truck. Take safety jacks away. Jack truck

down. Refer to Part 1, para 11-3

END OF TASK

17-32