TRANSMISSION TRANSFER REVERSE SHIFT LINKAGE ADJUSTMENT.

TM 9-2320-209-20-3-1

9-6. TRANSMISSION TRANSFER REVERSE SHIFT LINKAGE ADJUSTMENT.

Wood blocks (4)

3/4-inch open end wrench

TOOLS:

7/16-inch wrench

Large screwdriver

Jack

None

SUPPLIES:

PERSONNEL:

Two

CONDITION: Truck parked, engine off, handbrake set, rear

EQUIPMENT

wheels chocked.

NOTE

Transmission transfer case must be warmed up to

operating temperature before making checks or

adjustments on linkage.

a. Preliminary Procedure. Using jack, raise one front wheel off ground. Refer

b. Adjustment (Forward Speed).

FRAME 1

Put FRONT TRANSMISSION shift lever (1) to position 1 (first gear).

Soldier A

Turn raised wheel (2) 1/2 turn forward.

Soldier B

GO TO FRAME 2