g. Repair of Transmission Transfer Controls and Linkage. Repair transmission
transfer controls and linkage by welding, straightening or replacing bent or damaged
h. Replacement of Transmission Transfer Shift Lever and Linkage (Trucks
M49A1C, M49A2C, M50A1, M50A2, and M50A3.
Screw nut (1) and washer (2) on rod (3) and then screw yoke (4) on rod.
Do not tighten nut (1) at this time. It will be tightened
after setting length of rod (3) on transfer.
GO TO FRAME 2