f. Removal of Transmission Transfer Power Takeoff Shifting Lever Lockout
Linkage (Trucks M49A1C, M49A2C, M50A1, M50A2, and M50A3).
Using needle nose pliers, take cotter pin (1) out of straight headed pin (2) and
take out straight headed pin.
Some model trucks have setscrew holding pin in forward
end of control rod (3) instead of cotter pin (4). If so,
unscrew setscrew to take off control rod.
Using needle nose pliers, take cotter pin (4) out of swivel pin (5). Hold con-
trol rod (3) while taking out swivel pin and take off control rod.
Let swivel pin (5) hang on speed control wire (6) until control rod (3) is put
back on truck.
GO TO FRAME 2