Dry cleaning solvent is flammable. Do not use near an
open flame. Keep a fire extinguisher nearby when sol-
vent is used. Use only in well-ventilated places. Fail-
ure to do this may result in injury to personnel and
damage to equipment.
Clean transmission breather (1) with solvent.
Using rag, wipe surface clean around transmission breather mounting hole
in transmission housing cover (2).
Using wrench, screw in and tighten transmission breather (1).
Follow-on Maintenance Action Required:
Replace intermediate tunnel, front transmission gear-
shift lever, and boot. Refer to Part 3, para 18-5.
END OF TASK