 |
|||
|
|
|||
|
Page Title:
MANIFOLD HEATER SWITCH REMOVAL AND REPLACEMENT. - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-209-20-3-1
c. Replacement.
1.
Hold switch (1) below panel (2) and plug two connectors (3) into switch as
tagged. Take off tags.
2.
Look at ON-OFF position markings on switch (1). Set switch to OFF position.
Put switch lever (4) through hole from behind panel and aline screw holes.
3.
Hold switch (1) in place and screw in two screws (5). Using screwdriver,
4.
tighten screws.
NOTE
Follow-on Maintenance Action Required:
Reconnect battery ground cable. Refer to para 7-58.
1.
Operate manifold heater to check switch. Refer to
2.
TM 9-2320-209-10.
END OF TASK
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version