Section X. MISCELLANEOUS ITEMS

TM 9-2320-209-20-3-1

Section X. MISCELLANEOUS

ITEMS

DIRECTIONAL SIGNAL AND SOLID STATE FLASHER REMOVAL, REPAIR,

AND REPLACEMENT.

Flat-tip screwdriver

TOOLS:

Drill

3/8-inch wrench (2)

Finely pointed awl

No. 6-32 NC tap (4)

Round head machine screws (4)

No. 36 drill bit

Self-tapping screws

No. 28 drill bit

None

SUPPLIES:

PERSONNEL:

TW O

EQUIPMENT

CONDITION:

Truck parked, engine off, handbrake set.

Preliminary Procedures.

(1) Disconnect battery ground cable. Refer to para 7-58.

(2) Open hood and left side panel. Refer to TM 9-2320-209-10.

b. Removal.

(1) Directional signal.

Unscrew and take off connector (1).

Using screwdriver, unscrew screw (2) to loosen clamp (3).

Pull open clamp (3) and take off directional signal (4).

END OF TASK