7-61. TRAILER ELECTRICAL COUPLING RECEPTACLE REMOVAL AND REPLACE-
Trailer electrical coupling receptacle may or may
not be mounted on a bracket. This task is the
same for all trailer electrical coupling receptacles.
7/16-inch wrench (2)
CONDITION: Truck parked, engine off, handbrake set.
Lift receptacle cover (1). Using 7/16-inch wrenches, unscrew and take off four
nuts (2), four lockwashers (3), ground wire (4), four capscrews (5), and cover.
Pull coupling receptacle (6) with wiring harness (7) forward.
GO TO FRAME 2