Cleaning, Inspection, and Repair.
Using soapy water, clean light door (1) and lens.
Check lens for cracks
or other damage.
Dry cleaning solvent is flammable. Do not use near an
open flame. Keep a fire extinguisher nearby when sol-
vent is used. Use only in well-ventilated places. Fail-
ure to do this may result in injury to personnel and
damage to equipment.
Using solvent, clean all other parts.
Check all screws for damaged threads.
Check light door (1) and housing (2) for dents, cracks, stripped threads
or other damage. If any parts of housing are damaged, get a new front
Check gasket (3) for cracks and breaks.
Check lamps (4) for burned out filaments and for corroded contacts.
Check electrical connectors (5) for damage.
T brow away damaged parts.
Get new parts in their place.
Follow-on Maintenance Action Required:
Put composite lamps in sockets and replace light door.
Refer to para 7-41.
Replace front composite light. Refer to para 7-40.
END OF TASK