7-38. FLOODLIGHT HOUSING REMOVAL, REPAIR, AND REPLACEMENT (TRUCK
TOOLS: 3/4-inch box wrench
9/16-inch box wrench
Solvent, dry cleaning, type II (SD-2) , Fed. Spec P-D-680
Truck parked, engine off, handbrake set.
Remove floodlight sealed beam. Refer to para 7-39.
Using 3/4-inch wrench, hold capscrew (1) and using 9/16-inch wrench,
unscrew and take off nut (2), lockwasher (3), and washer (4).
Take out capscrew (1) with two spring washers (5), two washers (6), and
Take out spacer (8) and grommet (9).
Do steps 1 through 3 again for other side of housing and take off floodlight
END OF TASK