7-33. BLACKOUT STOPLIGHT ASSEMBLY (RIGHT SIDE ONLY) REPAIR.
TOOLS: Flat-tip screwdriver
CONDITION: Truck parked, engine off, handbrake set, main light
switch in OFF position.
Preliminary Procedure. Remove blackout stoplight lamp. Refer to para 7-32.
On some trucks the blackout stoplight is on top
of mounting bracket and on others it is under
Using screwdriver, unscrew and take out two screws (1). Take ground
wire (2) off one screw.
Take lamp socket and wire assembly (3) out of light housing (4).
Pull positive lead (5) out of plug (6).
END OF TASK