7-30. TAILLIGHT AND STOPLIGHT ASSEMBLY (LEFT SIDE ONLY) REPAIR.
TOOLS: Flat-tip screwdriver
Cross-tip screwdriver (Phillips type)
Contact cleaner, MS 230
CONDITION: Truck parked, engine off, handbrake set.
(1) Remove left taillight and stoplight assembly. Refer to para 728.
(2) Remove left taillight and stoplight lamps. Refer to para 729.
On some taillight and stoplight assemblies, you will have
to use a flat-tip screwdriver to take out screws (1 and 2).
Using phillips screwdriver, unscrew and take out two screws (1) and
two washers (3).
Using phillips screwdriver, unscrew and take out three screws (2).
Take socket assembly with wiring (4) from light housing (5).
END OF TASK