FRONT SERVICE SEALED BEAM REMOVAL
TOOLS: Flat-tip screwdriver
Truck parked, engine off, handbrake set, light switch
in OFF position.
Using screwdriver, unscrew and take out three screws (1) from headlight
mounting ring (2). Take off mounting ring.
Using screwdriver, loosen three screws (3) from sealed beam retaining ring (4).
Hold sealed beam (5) in place and turn retaining ring to left and take it off.
Tag wires (6) so they will be put back in same places.
Pull out sealed beam (5) and unplug three plugs (7).
END OF TASK