 |
|||
|
|
|||
|
Page Title:
FRONT SERVICE HEADLIGHT ASSEMBLY REPAIR. |
|
||
| ||||||||||
|
|
 TM 9-2320-209-20-3-1
7/16-inch box wrench
Flat-tip screwdriver
TOOLS:
3/8-inch drive extension, 12 inches
6-inch long nose pliers
long
7/16-inch socket wrench
3/8-inch drive ratchet
3/8-inch drive
SUPPLIES:
Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680
One
PERSONNEL:
Truck parked, engine off, handbrake set, light
EQUIPMENT
CONDITION:
switch in OFF position.
Preliminary Procedures.
a.
(1) Remove front service headlight assembly. Refer to para 7-17.
(2) Remove front service headlight sealed beam. Refer to para 7-20.
Disassembly.
b.
1.
Using long nose pliers, unhook spring (1) from ring assembly (2) and headlamp
housing (3).
2.
Pull ring assembly (2) out and away from two adjusting screws (4).
Using screwdriver, unscrew and take out two adjusting screws (4).
3.
GO TO FRAME 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version