Put circuit breaker (1) on firewall (2) as shown and line up two mounting holes,
Put two screws (3) in mounting holes and tighten, using phillips screwdriver.
Plug connectors (4 and 5) into circuit breaker (1) as shown.
Trucks with auxiliary power outlets have an additional 15-
ampere circuit breaker. This circuit breaker is located
next to circuit breaker (1). Replacement procedures are
same for both breakers.
Follow-on Maintenance Action Required:
1. Reconnect battery ground cable. Refer to para 7-58.
2. Close hood and left side panel. Refer to
END OF TASK