CIRCUIT BREAKER REMOVAL AND REPLACEMENT.

TM 9-2320-209-20-3-1

TOOLS:

Cross-tip screwdriver (Phillips type)

SUPPLIES:

None

PERSONNEL: One

EQUIPMENT

CONDITION:

Truck parked, engine off, handbrake set.

Preliminary Procedures.

(1) Open hood and left side panel. Refer to TM 9-2320-209-10.

(2) Disconnect battery ground cable. Refer to para 7-58.

Removal.

FRAME 1

Take off connectors (1 and 2).

Using phillips screwdriver, unscrew two screws (3). Take out screws and take

circuit breaker (4) off firewall (5).

NOTE

Trucks with auxiliary power outlets have an additional

15-ampere circuit breaker. This circuit breaker is

located next to circuit breaker (4). Removal procedures

are same for both breakers.

END OF TASK