Make sure replacement temperature gage (1) is matched
to sending unit.
Put temperature gage (1) through hole in cluster panel (2) from front of
Put mounting bracket (3) on two studs (4) from back of cluster panel (2).
Using 3/8-inch wrench, screw on and tighten two nuts and lockwashers (5) on
Procedure for replacing each of the seven instruments
on instrument cluster is the same.
Follow-on Maintenance Action Required:
Reconnect battery ground cable. Refer to para 7-58.
Replace instrument `cluster. Refer to para 7-12.
END OF TASK