7-13. INSTRUMENT CLUSTER COMPONENTS (EXCEPT SPEEDOMETER AND
TACHOMETER) REMOVAL AND REPLACEMENT
Procedure for removal and replacement for each of
the instruments on instrument cluster is the same.
3/8-inch open end wrench
EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.
a. Preliminary Procedures.
(1) Disconnect battery ground cable. Refer to para 7-58.
Refer to para 7-12.
(2) Remove instrument cluster.
Using 3/8-inch wrench, unscrew and take off two nuts (1) from two mounting
studs (2) .
Take off two lockwashers (3) and bracket (4).
Pull temperature gage (5) out from front of instrument cluster (6).
GO TO FRAME 2