 |
|||
|
|
|||
|
Page Title:
ENGINE STARTER REMOVAL AND REPLACEMENT (TRUCKS WITH PUSH- BUTTON STARTER SWITCH) - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-209-20-3-1
FRAME 2
NOTE
Some starters may be at angle for mounting of left
side of engine.
1.
Check that position of starter flange to center line of solenoid is as shown. If
position is not as shown, do steps 2 and 3. If position is as shown, go to
frame 3.
Using 3/16-inch allen wrench, unscrew and take out six bolts (1).
2.
Turn starter flange (2) on starter housing (3), using solenoid centerline (4)
3.
as guide, until it is in position shown. Using 3/16-inch allen wrench, screw
in and tighten six bolts (1).
GO TO FRAME 3
TA 047097
7-60
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version