ENGINE STARTER REMOVAL AND REPLACEMENT (TRUCKS WITH FLOOR
PEDAL STARTER SWITCH).
5/8-inch open end wrench
Starter adapter gasket
Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680
CONDITION: Truck parked, engine off, handbrake set.
(1) Disconnect battery ground cable. Refer to para 7-58.
(2) Remove intake air cleaner. Refer to para 4-3.
Using 5/8-inch wrench, unscrew and take off three nuts and three lockwashers
Tag electrical cables (2) so that they will be put back in the same place.
Lift off three cables (2).
GO TO FRAME 2