7-8. STARTER SWITCH REMOVAL,
WITH PEDAL STARTER).
5/8-inch box wrench
Truck parked, engine off, handbrake set.
(1) Remove air cleaner filter element. Refer to TM 9-2320-209-10.
(2) Disconnect battery ground cable. Refer to para 7-58.
When taking electrical cables off posts, always
tag cables so they will be put back on right post.
Using 5/8-inch wrench, unscrew and take off two nuts and washers (1).
Lift cables (2 and 3) off starter switch (5).
Using screwdriver, unscrew and take out four screws with lockwashers (4).
Lift off starter switch (5).
END OF TASK