When taking electrical cables off posts, always
tag cables so they will be put back on correct
On trucks with LD series engines, magnetic
switch mounting bracket is mounted on engine.
Trucks with LDS series engine have bracket
mounted on exhaust support bracket as shown.
Using 7/16-inch wrench, unscrew and take off two nuts and lockwashers (1).
Pull out magnetic starter switch (2).
Using 3/8-inch wrench, unscrew and take off nut (3) and take off cable (4).
Using 5/8-inch wrench, unscrew two nuts (5) and take off cables (6 and 7).
Take magnetic starter switch (2) from truck.
Trucks with pedal starter have only one cable (7).
GO TO FRAME 2