Aline holes in bracket (1) with holes in firewall (2).
Put two bolts (3) through holes in firewall (2) and using 7/16-inch
wrench, hold bolts while soldier A screws on locknuts (4).
Using 7/16-inch wrench, screw on and tighten two locknuts (4).
Follow-on Maintenance Action Required:
1. Reconnect battery ground cable. Refer to para 7-58.
2. Test starter pedal and linkage by pushing pedal several
times. Check that linkage moves freely without binding.
3. Close hood and slide panels. Refer to TM 9-2320-209-10.
END OF TASK