7-5. GENERATOR REGULATOR REMOVAL AND REPLACEMENT.
1/2-inch open end wrench
Adjustable spanner wrench, 3/4-inch to 2-inch
Truck parked, engine off, handbrake set.
(1) Open hood and left side panel. Refer to TM 9-2320-209-10.
(2) Disconnect battery ground cable. Refer to para 7-58.
Using adjustable spanner wrench, unscrew and take off generator cable
connector (1) and chassis wiring connector (2) from generator regulator (3).
Put protective caps over ends of the two cable connectors
(1 and 2) and two receptacles on the regulator.
Using 1/2-inch wrench, unscrew and take off four nuts and lockwashers (4).
Take generator regulator (3) off shock mount assembly (5).
END OF TASK