Dry cleaning solvent is flammable. Do not use near
an open flame. Keep a fire extinguisher nearby when
solvent is used. Use only in well-ventilated places.
Failure to do this may result in injury to personnel
and damage to equipment.
If key (1) is taped on shaft, take off tape. Clean
key and shaft with solvent, then put key in slot.
Put key (1) in slot (2).
Line up keyway (3) in pulley (4) with key (1) in shaft (5). Put pulley on
shaft and press it on firmly.
Put flat washer (6) on shaft and screw on locknut (7) finger tight.
GO TO FRAME 2