 |
|||
|
|
|||
|
Page Title:
GENERATOR AND PULLEY REMOVAL AND REPLACEMENT - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-209-20-3-1
Using 5/8-inch socket wrenches, unscrew two nuts and washers (1) from bolts
1.
(2).
NOTE
Be careful when pulling out generator rear bolt (2).
Shims (3) may fall out.
2.
Hold generator (4) up with one hand and pull bolts (2) out of mounting bracket
(5). Leave two flat washers (6) on bolts.
Take shims (3) out from between generator (4) and mounting bracket (5).
3.
Set shims aside.
4.
Lift out generator (4).
GO TO FRAME 3
TA 047102
7-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version