THERMOSTAT REMOVAL AND REPLACEMENT - continued

TM 9-2320-209-20-3-1

Replacement.

WARNING

Dry cleaning solvent is flammable, Do not use near

an open flame. Keep a fire extinguisher nearby when

solvent is used. Use only in well-ventilated area.

Failure to do this will result in injury to personnel

and damage to equipment.

NOTE

Clean thermostat housing (1) using solvent. Make

sure surfaces that meet hoses or gaskets are smooth

and clean.

Put seal (2) into thermostat housing (1) so that lip of seal faces outward

toward thermostat (3).

2. Put thermostat (3) into thermostat housing (1) as shown.

GO TO FRAME 2

085562

6-34