Quantcast MANIFOLD HEATER ELECTRIC FUEL SUPPLY PUMP AND FUEL FILTER REMOVAL AND REPLACEMENT - continued

 

Click here to make tpub.com your Home Page

Page Title: MANIFOLD HEATER ELECTRIC FUEL SUPPLY PUMP AND FUEL FILTER REMOVAL AND REPLACEMENT - continued
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
MANIFOLD HEATER ELECTRIC FUEL SUPPLY PUMP AND FUEL FILTER REMOVAL AND REPLACEMENT - continued - TM-9-2320-209-20-3-10188
Up
/.5ton/TM-9-2320-209-20-3-1 2-1/2-Ton 6x6 M44A1 and M44A2 Series Trucks (Multifuel) Truck Cargo: M35A1 M35A2 M35A2C M36A2 Manual
Next
ENGINE MANIFOLD HEATER PUMP LINES AND FITTINGS REMOVAL AND REPLACEMENT (TRUCKS WITH ENGINES LDS 427-2 AND LDS 465-l).
TM 9-2320-209-20-3-1
Aline holes of two brackets (3).
Put fuel filter (1) and fuel pump (2) in place.
1.
2.
Using 1/2-inch socket wrench, screw on and tighten two screws with
washers ( 4).
Using 7/16-inch wrench, screw on and tighten tube adapter (5) to filter (1).
3.
Using 3/8-inch wrench, screw on and tighten tube adapter (6) to pump (2).
4.
5.
Screw on and tighten electrical connector (7) to fuel pump (2).
NOTE
Follow-on Maintenance Action Required:
Reconnect battery ground cable. Refer to para 7-58.
1.
2.
Close hood.  Refer to TM 9-2320-209-10.
END OF TASK
TA
083341
4-101

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.