Using 5/6-inch and 7/16-inch wrenches, join fuel tube (1) to union (2) and
screw on and tighten coupling nut (3).
Using 7/16-inch wrench, join fuel tube (4) to elbow (5) and screw on and
tighten coupling nut (6).
Plug connector (7) into pump (8). Using pliers, screw in and tighten
Follow-on Maintenance Action Required:
Turn on engine manifold heater. Refer to
Check all manifold heater pump fuel lines and fittings
for leaks. Check manifold heater operation.
Turn off engine manifold heater. Refer to
Close hood and right side panel. Refer to
END OF TASK