Using 13/16-inch wrench, screw in and tighten nozzle (l).
Using 7/16-inch wrench, screw on and tighten elbow (2) to nozzle (1).
Using 5/16-inch wrench, screw on and tighten inlet tube fitting (3).
Using 7/16-inch wrenches, screw on and tighten return tube fitting (4).
Put gasket (5) on spark plug (6) and using 7/8-inch wrench, screw on and
tighten spark plug (6).
Using 3/4-inch wrench, screw on and tighten electrical cable connector (7).
Follow-on Maintenance Action Required:
Reconnect battery ground cable. Refer to para 7-58.
Close hood and right side panel. Refer to
END OF TASK