 |
|||
|
|
|||
|
Page Title:
FUEL FILTERS REPAIR - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-209-20-3-1
FRAME 2
Put filter head gasket (1) into filter head (2).
1.
Fit filter housing (3) to filter head (2). Screw in sleeve nut (4) with
2.
washer (5) and gasket (6).
Using torque wrench with 5/8-inch socket wrench, tighten sleeve nut (4)
3.
to 180 pound-inches.
NOTE
Some trucks have only one bleeder valve ( 7).
Using 7/16-inch wrench, screw in and tighten two bleeder valves (7) .
4.
Using 9/16-inch wrench, screw on and tighten three elbows ( 8) to positions
5.
noted.
Using 5/8-inch wrench, screw on and tighten elbow ( 9).
6.
NOTE
Follow-on Maintenance Action Required:
Refer to para 4-10.
Put fuel filters back in truck.
END OF TASK
TA 047518
4-70
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version