Dry cleaning solvent is flammable. Do not
use near an open flame. Keep a fire ex
tinguisher nearby when solvent is used.
Use only in well-ventilated places. Failure
to do this may result in injury to personnel
and damage to equipment.
d. Cleaning, Inspection, and Repair. Clean all parts with solvent. Check parts
for burrs, nicks, and scratches on mating surfaces. Put in new parts for damaged
or bent parts.
e. Assembly of Primary Fuel Filter.
Put washer (1), spring (2), washer (3), gasket (4), and cup (5) on post (6)
Using 7/16-inch wrench, screw in and tighten drain cock (7) .
GO TO FRAME 2