Replacement of Secondary and Final Fuel Filter Assemblies.
Place secondary and final fuel filter assemblies (1) on three studs (2).
Using 9/16-inch wrench, screw on and tighten three nuts with lockwashers (3)
Join fuel lines (4, 5, 6, and 7) as tagged to four elbows (8).
Using 5/8-inch wrench, screw on and tighten three coupling nuts (9).
Using 11/16-inch wrench, screw on and tighten coupling nut ( 10). Take
Air bleed low pressure fuel system. Refer to para 4- 10f.
END OF TASK