FUEL FILTER ASSEMBLIES REMOVAL , REPLACEMENT, AND AIR BLEEDING - continued

TM 9-2320-209-20-3-1

Removal of Secondary and Final Fuel Filter Assemblies.

WARNING

To prevent fire or explosion, smoking, flame,

sparks, and glowing or hot objects are not

allowed near truck during maintenance of fuel

system components.

FRAME 1

Place container under two drain cocks (1) . Unscrew (open) both drain

cocks . Screw in drain cock when all fuel stops draining.

NOTE

Tag fuel lines before taking them off so they will be

put back in same place.

Using 5/8-inch wrench, unscrew three coupling nuts ( 2).

Using 11/16-inch wrench, unscrew coupling nut ( 3).

Take off fuel lines (4, 5, 6, and 7) .

Using 9/16-inch wrench, unscrew and take off three nuts and lockwashers ( 8).

Take off secondary and final fuel filter assemblies (9) .

7. Take out container and put fuel in approved disposal area.

END OF TASK