FUEL PUMP (IN-TANK) BRACKET AND PUMP ASSEMBLY REPAIR - continued

TM 9-2320-209-20-3-1

1. Connect threaded end of hose (1) to threaded end of fitting (2).

2. Install elbow (3) on plate and bracket (4).

3. Position gasket (5) over fuel pump (6) wire coming through plate and bracket (4) and

secure wire to plate and bracket (4) with washer (7) and nut (8).

4. Connect fuel pump (6) wire to terminal assembly (9) with screw (1 O) and install VA fuse

(11) in terminal assembly (9).

5. Install terminal assembly (9) and tab (12) (if available) on three studs of plate and

bracket (4). Secure with three lockwashers (13) and nuts (14).

6. Install seaI (15) and secure seal (15) by bending tab (12).

NOTE

Follow-on Maintenance Action Required.

7. Install fuel pump assembly. Refer to paragraph 4-8.

8. Install fuel tank. Refer to paragraph 4-6.

9. Connect battery ground cable. Refer to paragraph 7-58.

10. Check fuel pump for proper operation.

END OF TASK