 |
|||
|
|
|||
|
Page Title:
FUEL PUMP (IN-TANK) BRACKET AND PUMP ASSEMBLY REPAIR - continued |
|
||
| ||||||||||
|
|
 TM 9-2320-209-20-3-1
c. Replacement.
FRAME 1
1.
Secure one end of strap assembly (1) to pump (2) with screw (3), two lockwashers (4)
and nut (5).
2.
Secure the other end of strap assembly (1) to clamp assembly (6) with screw (3), two
lockwashers (4) and nut (5).
Install one end of hose assembly (7) on pump (2) and secure with clamp (8).
3.
Install recessed washer (9) and gasket (10) on pump (2) wire.
4.
Connect clamp assembly (6) to plate and bracket (19) with two screws (11), washers
5.
(12) and nuts (13).
Route pump (2) wire through plate and bracket (19) and secure with screw (11 ), clamp
6.
(14), washer (12) and nut (13).
7.
Install "O" ring (15) on fitting (16).
Put threaded end of fitting (16) through hole on plate and bracket (19) and secure with
8.
washer (17) and nut (18).
GO TO FRAME 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for a printable version