LADDER INSTALLATION PROCEDURE - continued

TM 10-5411-233-13&P

CARGO BED COVER (CBC), TYPE III, 2 1/2 T CARGO TRUCK, LMTV, AND LMTV TRAILER 0016 00

UNIT MAINTENANCE

Step 6. Using a Letter "Q" size drill bit, drill out the two marked holes. Remove any burrs.

Step 7. Install a 1/4-20 blind Rivnut in each of the two mounting holes with a using a Rivnut installation

tool. Install the Rivnut IAW the instructions for Rivnut installation found in WP 0013.

Step 8. Once all Rivnuts have been installed, mount the bracket with the hooks facing the rear edge of

the tailgate using a 1/4-20 x .75 inch long hex head screw and 1/4 inch lockwasher. Tighten all hardware

securely.

0016 00-11